Tplink Extender Setup

Got a new TP-Link wifi repeater? Confused about how to do the Tplink extender setup? If you need the steps to install a TP-Link range extender then, here you will find steps to install and configure the TP-Link extender. 

tplink extender setup or add to network

TP-Link Repeater Setup Via

The main method for setting up your TP-Link repeater is via . It is the official handle for repeater setup and configuration. But, there are two more methods that you can use to set up the wifi repeater, namely, the WPS method and the Tether app. Read this carefully to learn how to perform these methods.

TP-Link Extender Setup – Prerequisites

Keep the following points in mind to complete your repeater setup hassle-free; 

  1. A good and working ethernet cable is important if you are establishing a wired setup.
  2. The wifi router must have a stable and active internet.
  3. Ensure the power supply is consistent before proceeding with the setup.
  4. Connect your computer with the main wifi router only.

TP-Link Extender Setup, Install and Configuration Steps

Before proceeding with the configuration of the TP-link wifi extender, follow the steps given below to do the basic TpLink extender setup;

  • Step 1: The initial step is to unbox the TP-Link RE210 wifi repeater.
  • Step 2: Now associate the antennas of the router with the extender.
  • Step 3: Make sure you have placed your extender in a perfect place.
  • Step 4: After that, plug in your TP-Link RE210 wifi extender in the socket near the wifi router.
  • Step 5: The power light LED starts flashing.
  • Step 6: Make sure to detach any ethernet cord attached to your computer system.
  • Step 7: In case it does not start automatically, then hit the power button to switch it on.
  • Step 8: Check the internet signals before proceeding with the setup.
  • Step 9: Fix if there is any problem with the internet signals.

Step 10: Then click on the wifi icon on the taskbar, connect it to the repeater’s network i.e TP-Link-extender-2.4 GHz-5GHz.

TP-Link Extender Setup, Install and Configuration Steps

TP-Link Repeater Setup Using The WPS Method – 

The easiest way of TP-Link repeater set up with the router is using the WPS button. Before going ahead, make sure your router and extender both support the WPS button to complete the setup. Follow the steps carefully;

The easiest way of TP-Link repeater set up with the router is using the WPS button. Before going ahead, make sure your router and extender both support the WPS button to complete the setup. Follow the steps carefully;

  • Step 1: To start with installation first, plug in your TP-Link repeater to a power supply wall socket.
  • Step 2: Then, switch it on. It is easiest to install TP-Link wifi repeater.
  • Step 3: To start the setup, push the WPS button on your wifi router and then, Within the next two minutes push the WPS button on your TP-Link wifi repeater.
  • Step 4: See if the blue LED light on the repeater turns solid. This implies that the WPS connection is successful.
  • Step 5: To connect to frequency bands other than 2.4 GHz and 5 GHz, attempt the first two steps again to connect.
  • Step 6: That’s it, you can enjoy a higher and more stable speed of the internet.

In case any of your devices doesn’t support a WPS button on it then, no need to panic. You can configure the TP-Link extender using the internet browser in your computing device. Follow the steps properly to set up your Tp-Link wifi range extender;

  • Step 1: On your wireless PC device launch your most used web browser. 
  • Step 2: In the search bar of your web browser enter, the official URL for tp-link repeater settings.
  • Step 3: Now, look for the setup login on the webpage. 
  • Step 4: Then, click on the setup login tab to the TP-Link wifi repeater window and type in your username and password in their respective fields to log into the settings page for your wifi repeater. 
  • Step 5: Navigate to the settings tab and then tap on the Network option.
  • Step 6: Choose either 2.4 GHz or 5GHz according to your preference and save the changes by tapping on the Save Tab.
  • Step 7: Finally, your TP-Link repeater setup is complete via the web browser method.

Easy Steps For TP-Link Extender Setup Using The Tether App Method

Another simple way of configuring your TP-Link extender is via the Tether app. It is very simple to perform this procedure, so follow the steps properly;

Easy Steps For TP-Link Extender Setup Using The Tether App Method
  • Step 1: First of all, open the Google play store on any device that you use.
  • Step 2: Download the Tether app from the Google play store by tapping the download tab.
  • Step 3: After the downloading is complete, click on the app’s icon to launch it.
  • Step 4: Once the app is open, log in by entering all the important credentials of the wireless extender.
  • Step 5: The tplink extender login page of the TP-Link RE210 extender will appear on your screen. 
  • Step 6: Hit on the extended network tab, next.
  • Step 7: Click on the extended network’s name.
  • Step 8: On this page, you may also modify your wifi network’s name for the extended network.
  • Step 9: On the bottom of the main screen of the range extender.
  • Step 10: Then, navigate to the extended network and alter the wireless network name.
  • Step 11: After that apply the changes and click on the save button to save it.

TP-Link Repeater Setup Complete!

That was all the necessary information for the TP-Link repeater setup. Follow the method for TP-Link extender installation which is suitable for you. In case, you are unable to access the official website for setup, i.e., then you can also access the admin panel through its assigned IP address. The official IP address is Once you have logged into the admin panel, you can check the firmware updates, login information, and also make required changes to your repeater. If you face any problem during or after the TP-link extender setup is complete, then contact our technical support team and get solutions to your problems.