Tplink Extender Firmware Update Failed

Are you trying to update Tplink extender firmware but getting an error message? If you can’t update the Tplink repeater firmware, then chances are you are downloading incompatible or corrupt firmware. To avoid technical glitches, download the compatible version of the Tplink firmware. You can download the updated firmware from tplinkrepeater.net. Make sure that you are following the correct instructions while updating the Tplink firmware manually.

Tplink extender firmware upgrade stuck

Sometimes, due to the wrong web address or corrupted internet connection, Tp-link extender firmware takes forever. In that situation, make sure that you are typing the correct web address. There are several reasons that are responsible for Tplink extender firmware update failure.

Reasons for Tplink extender firmware update failure

Before moving forward with troubleshooting steps, you should know the reasons for the Tplink extender firmware update failure. Following are the most common reasons:

  • Wrong firmware version.

  • Poor internet connection.

  • Incorrect web address.

  • Overheated extender.

  • Damaged hardware of Tplink extender.

  • Location of the extender.

Troubleshooting: Tplink extender firmware not updating

Follow the below-mentioned troubleshooting methods to fix Tplink extender firmware not updating issues.

Fix 1: Power cycle the extender and router

Power cycling the extender and router resolve several issues. Unplug your extender and router from the power source. Now, wait for a few seconds and then reconnect the router and extender. Then, connect the WiFi-enabled device to the extender’s network and update the Tplink extender firmware.

Tplink Extender Login Through A Wired Connection

Fix 2: Use the correct version of the firmware

If you are downloading the wrong version of the firmware, then you can encounter the Tplink extender firmware upgrade stuck issue. In order to fix this issue, make sure that you have selected the correct right version of the firmware as per your extender model number.

Setup Tplink extender through tplinkrepeater.net

Fix 3: Check the internet connection

You should have a stable and reliable internet connection to update the Tplink extender firmware. Ensure that your extender is connected to the router in a proper manner. The ethernet cable is well-maintained and connected to the extender. If you are using a wireless connection, then switch to the wired connection.

Fix 4: Entrer correct web address

Because of the incorrect web address, users can encounter Tplink extender firmware not updating issues. Therefore, make sure that you are typing the correct web address in the address bar. The correct web address is tplinkrepeater.net. Don’t enter the web address in the search bar. If you are facing issues while accessing the web address, then try to use the IP address to access the login page.

Fix 5: Unplug the Tplink extender

Overheated Tplink extender can also cause the Tplink extender firmware update failure issues. To resolve this issue, unplug the Tplink extender and disconnect all the devices that are connected to the extender’s network. Wait for a while, and then reconnect the Tplink extender to the wall socket.

Fix 6: Relocate the Tplink extender

Location of the Tplink extender can also give the Tplink extender firmware update failed issues. Place the extender on a higher, centred, and ventilated area. Also, keep the extender away from other devices like baby monitors, microwaves, treadmills, refrigerators, cordless phones, and Bluetooth speakers because the radio wave emitting devices can cause interference with the extender’s network. Place your Tplink WiFi range extender away from the window and public WiFi network.

Fix 7: Check the Tplink extender hardware

Damaged Tplink extender hardware can also cause the firmware update fissure issue. To fix the Tplink extender hardware issue to update the firmware successfully. Make sure that you are following the correct instructions to set up the Tplink WiFi range extender.

Fix 7: Check the Tplink extender hardware

Damaged Tplink extender hardware can also cause the firmware update fissure issue. To fix the Tplink extender hardware issue to update the firmware successfully. Make sure that you are following the correct instructions to set up the Tplink WiFi range extender.

Fix 8: Follow the correct procedure of Tplink extender firmware updation

Make sure that you are following the proper steps to update the Tplink extender firmware. Following are the step-by-step instructions to update the Tplink extender firmware:

  • First of all, connect your Tplink extender to the WiFi router and turn it on.

  • Now, connect your computer or laptop to the extender’s network and open a web browser.

  • Type tplinkrepeater.net in the URL bar of the web browser and press the enter key.

  • On the login page, enter your default username and password in the given field and tap on the login button.

  • Go to the “system tool” tab and select the “backup and restore” option to backup the current settings.

  • Again go to the “system tools” tab and select the upgrade option.

  • Download the latest version of the Tplink range extender firmware and save the file.

  • Unzip the file and tap on the update button to proceed further. Proceed with the on-screen instructions to complete the updation process and reboot your device.

Fix 9: Reset the Tplink extender

If the above-mentioned methods are not working, then try to reset your Tplink WiFi range extender to factory default settings. You can reset your extender by pressing the reset button or through the tplinkrepeater.net web address.

Reset the Tplink extender with a reset button

  • First of all, plug your Tplink extender into the wall socket and turn it on.

  • Now, take a sharp pin or paperclip and locate the reset button on the extender.

  • Press the reset button for a couple of seconds and wait for a blinking LED light.

  • When you see a blinking LED light on the extender, release the button.

  • Your extender will restore its factory default settings.

Reset the Tplink extender with a web browser

  • Connect your Tplink extender to the wall socket and router.

  • Now, connect your device to the wireless network and open a web browser.

  • Type tplinkrepeater.net in the URL bar and press the enter key.

  • Then, move to the login page and enter your login username and password.

  • Go to the system tools section and select the backup and restore option from the drop-down menu to backup the current settings.

  • Again go to the system tool tab and select the factory default option.

  • Now, tap on the restore button and proceed with the on-screen instructions to reset the Tplink range extender to factory default settings.

  • Then, reboot the device and try to update the Tplink extender firmware.